Posts Tagged ‘Manufacturer’

Playground Equipment Manufacturer

Sunday, March 26th, 2017

Childrens are becoming so modern that rather than going out to play, they sit at home and play on line games, video games and other indoor games. They have forgotten the importance of playgrounds and their benefits. However, it is essential that children get outdoors for both their health and wellbeing. This article highlights the importance of providing children access to fun loving, stimulating and safe outdoor play areas.

However, it is important to revive the importance of playgrounds, as outdoor playing provides good health and wellbeing and not just fun and enjoyment.

Playground Equipment Manufacturer

Wednesday, March 8th, 2017

Playground is the place where the kids can play and enjoy from which they can grab the extra energy which helps them to stay fit. But, we should always keep in mind that playground equipment safety is essential for any parent, teacher or someone supervising the kids.

There are several things included in playground safety. The first one is to have good playground safety rules made for kids, so that they don’t misuse the equipment that might cause danger. The next thing to consider is to inspect the playground equipment to make sure that it is safe. The authority must properly supervise the equipment to ensure that they meet the laid playgrounds safety rules. It is always better that adult set playground safety rules themselves and make children know the importance of following the set regulations.

Stimulations, by Manufacturer

Saturday, February 11th, 2017

Training collars are not all created equal. Each collar offers a variety of stimulation levels and each manufacturer might have stimulation variations in their units. Since the has yet to be a universal system, it will be up to you to determine which collar is best for your needs for training your dog.

Many people make the mistake of assuming that if they buy a Tri-Tronics collar and it is effective at a level 2 for their dog that using a level 2 emitted from the SportDog collar is going to create the same response. This couldn’t be further from the truth, since each manufacturer has their own specifications.

Health Concern Supplement Manufacturer

Monday, February 6th, 2017

The market trends in dietary supplements reflect current scientific research combined with current health conditions and trends. A look at the neutraceutical market today will show that there are specific products for supporting specific health conditions for the heart, lung, diabetes, pregnancy, supplements specifically for women, men and women over 40, for children and for the aging, those actively involved in sports, body building, for dieters, for skin and digestion, and for hair care. General health products for overall health and nutrition are still available categorized by age groups and gender.

Growing Research and Health Trends

Manufacturer Coupons

Monday, September 5th, 2016

Manufacturer Coupons are coupons that are issued by the product manufacturer. Manufacturers will often try to use coupons as a method to build their brand or promote a new product. Both of these types of manufacturer coupons will save you money.

However, not all stores will participate in certain manufacturer coupons. Be sure to ascertain if your coupon will be accepted at the store you frequent prior to checkout.

Multiplay System manufacturer

Wednesday, August 10th, 2016

Technological advances in play systems have given people a wide choice on what to choose for their play system, As like in old days to create a see saw first you have to arrange peace of wood and then have measure it approximately and cut it and finally attach to a base .To make this you have waste a whole day and if the balance of the wood in not properly distributed then t there would be no use of that swing. But in this modern era only if you wish to situate a play system for your kids then you have just go to market and buy it, after that you can assemble in your back with the help of the installation guide and these play system also come with the great safety measures, like most of them are made up of the plastic which means it doesn’t need any maintenance and with the proper rubber padding were ever required in form of seats

Konjac Gum manufacturer

Wednesday, December 2nd, 2015

The main composition is Portuguese konjac dew, chitosan is a low-calorie, low protein, high dietary fiber of food, and the rich of the human body needs more than 10 kinds of amino acids and trace elements, as functional food, to hypertension, obesity, diabetes, constipation, have certain curative effect, can poison the toxin in the body and garbage, prevent colon cancer. Also has water soluble, thickening, stability, suspension, gel, into film, bond, etc DuoZhong physical and chemical properties, and so is a natural health food is the ideal food additives.

Operation Plumbbob – Flanged Butterfly Valve Manufacturer – China Flange

Wednesday, August 19th, 2015

The operation was the sixth test series and consisted of 29 explosions, of which two did not produce any nuclear yield. 21 laboratories and government agencies were involved. While most Operation Plumbbob tests contributed to the development of warheads for intercontinental and intermediate range missiles, they also tested air defense and anti-submarine warheads with small yields. They included 43 military effects tests on civil and military structures, radiation and bio-medical studies, and aircraft structural tests. Operation Plumbbob had the tallest tower tests to date in the U.S. nuclear testing program, as well as high-altitude balloon tests. One nuclear test involved the largest troop maneuver ever associated with U.S. nuclear testing.
Almost 1,200 pigs were subjected to bio-medical experiments and blast-effects studies during Operation Plumbbob. On shot Priscilla (37 KT), 719 pigs were used in various different experiments on Frenchman Flat. Some pigs were placed in elevated cages and provided with suits made of different materials, to test which materials provided best protection from the thermal pulse. Other pigs were placed in pens at measuring distances from the epicenter behind large sheets of glass to test the effects of flying debris on living targets.
Approximately 18,000 members of the U.S. Air Force, Army, Navy and Marines participated in exercises Desert Rock VII and VIII during Operation Plumbbob. The military was interested in knowing how the average foot-soldier would stand up, physically and psychologically, to the rigors of the tactical nuclear battlefield.
Studies were conducted of radiation contamination and fallout from a simulated accidental detonation of a weapon; and projects concerning earth motion, blast loading and neutron output were carried out.
Nuclear weapons safety experiments were conducted to study the possibility of a nuclear weapon detonation during an accident. On July 26, 1957, a safety experiment, “Pascal-A” was detonated in an unstemmed hole at NTS, becoming the first underground shaft nuclear test. The knowledge gained here would provide data to prevent nuclear yields in case of accidential detonations, for example a plane crash.
The Rainier shot, conducted September 19, 1957, was the first fully contained underground nuclear test, meaning that no fission products were vented into the atmosphere. This test of 1.7 kilotons could be detected around the world by seismologists using ordinary seismic instruments. The Rainier test became the prototype for larger and more powerful underground tests.
Radiological effects
The 43,000 foot high cloud as seen from the control point, 30 minutes after the Priscilla event
Plumbbob released 58,300 kilocuries (2.16 EBq) of radioiodine (I-131) into the atmosphere. This produced total civilian radiation exposures amounting to 120 million person-rads of thyroid tissue exposure (about 32% of all exposure due to continental nuclear tests).
Statistically speaking, this level of exposure would be expected to eventually cause between 11,000 and 212,000 excess cases of thyroid cancer, leading to between 1,000 and 20,000 deaths.
In addition to civilian exposure, troop exercises conducted near the ground near shot “Smoky” exposed over three thousand servicemen to relatively high levels of radiation. A survey of these servicemen in 1980 found significantly elevated rates of leukemia: ten cases, instead of the baseline expected four.[citation needed]
Hood’s radioactive cloud tops off at nearly 49,000 feet above Yucca flats, as seen from 14 miles away. The detonation sent an above normal thermal pulse across the desert, igniting bushes and other growth up to 3 miles away on nearby foothills, as seen to the right of the dust cloud on the desert floor
The first nuclear-propelled manmade object in space?
During the Pascal-B nuclear test, a heavy (900 kg) steel plate cap (a piece of armor plate) was blasted off the top of a test shaft at an unknown speed. The test’s experimental designer Dr. Brownlee had performed a highly approximate calculation that suggested that the nuclear explosion, combined with the specific design of the shaft, would accelerate the plate to six times escape velocity. The plate was never found, but Dr. Brownlee believes that the plate never left the atmosphere (it may even have been vaporized by compression heating of the atmosphere due to its high speed). The calculated velocity was sufficiently interesting that the crew trained a high-speed camera on the plate, which unfortunately only appeared in one frame, but this nevertheless gave a very high lower bound for the speed. After the event, Dr. Robert R. Brownlee described the best estimate of the cover’s speed from the photographic evidence as “going like a bat!!”
This incident was reputedly used as part of the technical justification for the Orion project for possible use of nuclear blasts for outer-space propulsion.
List of tests
The tail, or ft, section of a U.S. Navy Blimp is shown with the Stokes cloud in background. The blimp was over five miles from ground zero when it was collapsed by the shock wave. The airship was unmanned and was used in military effects experiments on blast and heat. Navy personnel on the ground in the vicinity of the experimental area were unhurt. On the ground to the left are the remains of the blimp’s forward section.
The fireball from the 74 kiloton “Hood” thermonuclear event as seen from the control point 14 miles from ground zero. Hood was the largest atmospheric nuclear event to occur on the continent. The blast was powerful enough to rattle windows over 300 miles away in California, and the flash was seen by an airline pilot flying over Hawaii, about 2700 miles from the NTS.
The tests comprising Operation Plumbbob were as follows in TNT equivalent:
Operation Plumbbob Test Blasts
Test Name
12 kt
Tower shot
140 tons
5 June 1957
0.5 kt
Balloon shot
18 June 1957
10 kt
Balloon shot
24 June 1957
37 kt
Balloon shot
1 July 1957
zero yield
Safety experiment
5 July 1957
74 kt
Balloon shot, largest atmospheric test in the continental United States
15 July 1957
17 kt
Tower shot
19 July 1957
2 kt
Live fire of AIR-2 Genie air-to-air rocket
24 July 1957
10 kt
Tower shot
25 July 1957
9.7 kt
Balloon shot
26 July 1957
Shaft safety experiment
7 August 1957
19 kt
10 August 1957
Zero yield
Shaft safety experiment
18 August 1957
17 kt
Tower shot
23 August 1957
11 kt
Balloon shot
27 August 1957
Shaft safety experiment
Franklin Prime
30 August 1957
4.7 kt
31 August 1957
44 kt
Tower shot
2 September 1957
11 kt
Tower shot
6 September 1957
197 tons
Balloon shot
6 September 1957
300 tons
Surface safety experiment
8 September 1957
1 kt
Balloon shot
14 September 1957
11 kt
Tower shot
16 September 1957
12 kt
Balloon shot
19 September 1957
1.7 kt
Tunnel shot. First US underground nuclear test.
23 September 1957
19 kt
Tower shot
28 September 1957
12 kt
Balloon shot
7 October 1957
8 kt
Balloon Shot
“United States Nuclear Tests, July 1945 through September 1992 (DOE/NV-209)” (pdf). U.S. Department of Energy Nevada Operations Office. 2000.  Original source for test information.
Plumbbob page on the Nuclear Weapons Archive (also refers to manhole cover issue mentioned above).
“Estimated Exposures and Thyroid Doses Received by the American People from Iodine-131 in Fallout Following Nevada Atmospheric Nuclear Bomb Tests”. National Cancer Institute. 1997. 
Wikimedia Commons has media related to: Operation Plumbbob
^ Institute of Medicine (U.S.). Committee on Thyroid Screening Related to I-131 Exposure, National Research Council (U.S.). Committee on Exposure of the American People to I-131 from the Nevada Atomic Bomb Tests, ed (1999) (in English). Exposure of the American people to Iodine-131 from Nevada nuclear-bomb tests: review of the National Cancer Institute report and public health implications. National Academies Press. pp. 113-114. ISBN 9780309061759. 
^ Brownlee, Robert R. (June 2002). “Learning to Contain Underground Nuclear Explosions”. Retrieved 2006-07-31. 
^ Learning to Contain Underground Nuclear Explosions By Dr. Robert R. Brownlee – June 2002
^ Operation Plumbob at the Nuclear Weapon Archive
v d e
U.S. nuclear testing
Anvil  Aqueduct  Arbor  Argus  Bedrock  Bowline  Buster-Jangle  Castle  Chariot  Charioteer  Cornerstone  Cresset  Crossroads  Crosstie  Dominic  Emery  Fishbowl  Flintlock  Fulcrum  Fusileer  Greenhouse  Grenadier  Grommet  Guardian  Hardtack  Ivy  Julin  Latchkey  Little Feller  Mandrel  Musketeer  Niblick  Nougat  Phalanx  Plowshare  Plumbbob  Praetorian  Quicksilver  Ranger  Redwing  Roller Coaster  Sandstone  Sculpin  Sedan  Starfish Prime  Storax  Sunbeam  Teapot  Tinderbox  Toggle  Touchstone  Trinity  Tumbler-Snapper  Upshot-Knothole  Whetstone  Wigwam
Testing areas
Amchitka  Area 2  Area 5  Area 11  Area 19  Area 20  Bikini Atoll   Frenchman Flat  Jackass Flats  Nevada Test Site  Pacific Proving Grounds  Pahute Mesa  Rulison  Salmon Site  Yucca Flat
Other articles
Fallout: An American Nuclear Tragedy  Alvin C. Graves  Chuck Hansen  Corbin Harney  Human experimentation in the United States  Nevada Desert Experience  Radiation Exposure Compensation Act  Reactor grade plutonium nuclear test  Vela Uniform
Categories: Nevada Test Site | American nuclear explosive tests | Radiation health effects | 1957 in the United StatesHidden categories: All articles with unsourced statements | Articles with unsourced statements from February 2010

The Development Trend Of Humidity Sensor – Gas Compressor Manufacturer – Oilfield Auxiliary

Thursday, May 28th, 2015

In the industrial and agricultural production, weather, environmental protection, national defense, scientific research, aerospace and other departments are often required to measure and control humidity. However, in conventional environmental parameters, the humidity is the most difficult to accurately measure a parameter. With the dry and wet bulb hygrometer or a hair hygrometer to measure humidity, the method has long been unable to meet the needs of the development of modern science and technology. This is because the measurement of humidity than the measurement of complex multi-temperature, the temperature is measured is an independent, while the humidity is affected by other factors (atmospheric pressure, temperature) effects.
In addition, the calibration of humidity is also a problem. Production abroad humidity calibration equipment prices are very expensive.
In recent years, the humidity sensor research and development at home and abroad have made great strides. Humidity sensor is moving from simple humidity sensor to the integrated, intelligent, multi-parameter detection of the direction of rapid development, in order to develop a new generation of humidity / temperature measurement and control system has created favorable conditions for humidity measurement techniques will also be raised to a new level.
The characteristics of humidity sensor
Humidity sensor is the simplest humidity sensor. Humidity sensor are mainly resistive, capacitive two broad categories.
a humidity sensitive resistor
Humidity resistance is characterized by the substrate covered by a layer of wet material with a sense of the film, when the air in the water vapor adsorbed on a sense of the wet membrane, the components of the resistivity and resistance values are changed to use this feature Humidity can be measured. Many different types of humidity resistance, such as metal oxide humidity resistance, humidity resistance of silicon, ceramic humidity resistance and so on. Humidity resistance has the advantage of high sensitivity, the main drawback is that linearity and interchangeability of products poor.
b Humidity Capacitance
Humidity capacitors are generally made with the polymer film capacitors, polymer materials commonly used in polystyrene, polyimide, cellulose acetate, etc. butyricum. When the ambient humidity changes, the capacitance of the dielectric constant humidity changes, so that it is also a change in capacitance, its capacitance is proportional to the change in relative humidity. The main advantage of capacitive humidity sensor with high sensitivity and product interchangeability is good, fast response, a small amount of moisture lag, easy to manufacture, easy to achieve miniaturization and integration, and its accuracy in general is lower than the humidity sensitive resistor. The main production abroad humidity capacitor manufacturers are Humirel company, Philips Company, Siemens Corporation. To Humirel produced SH1100-type humidity sensor capacitor, for example, the measurement range is (1% ~ 99%) RH, at 55% RH when the electrical capacity of 180pF (typical value). When the relative humidity from 0 to 100%, the changes in capacitance range is 163pF ~ 202pF. The temperature coefficient of 0.04pF / , humidity hysteresis amount of 1.5%, response time of 5s.
In addition to resistive, capacitive humidity sensor, there are ionic-type humidity sensor, weight-type humidity sensor (with a sense of the changes in the weight of wet film to change the oscillation frequency), light intensity-type humidity sensor, SAW humidity sensor and so on.
Humidity sensor linearity and anti-pollution poor in the detection of ambient humidity, the humidity sensor to a long-term exposure to the environment under test, it is easily affected by pollution, measurement accuracy and long-term stability.

05 Chinese textile fabric development of new features – Digital Infrared Thermometer Manufacturer

Saturday, December 6th, 2014

Bedding industry, textile industry is currently one of the fastest growing categories. Bedding industry’s rapid development, led the development of textile fabrics; the emergence of new types of textile fabrics, but also greatly enriched the type of bedding products.

With the bedding industry toward innovation, self-direction for the rapid development of textile fabric on the variety and functionality are increasingly high requirements. At present the development of China home textile fabrics how a situation in 2005, home textile fabrics showing how the development of the situation, the trend of future development issues, people are more concerned about the industry.